I. Materials Science

3D-Tittle-print-2016_4(1)

<- Back

1. Title: Experimental Characterization of Innovative Viscoelastic Foams

DOI 10.13140/RG.2.1.5150.6325

Authors: Massimo Viscardi, Maurizio Arena

Organization: University of Naples “Federico II”, Department of Industrial Engineering, Via Claudio, 21 – 80125 Napoli, Italy


2. Title: Optimization Of Tribological Properties Of Aluminium Honeycomb Reinforced Polymeric Composites Using Grey Based Fuzzy Algorithm

DOI 10.13140/RG.2.1.4683.1762

Authors: K.Panneerselvam, K.Lokesh, D. Chandresh, T.N.S.Ramakrishna

Organization: Department of Production Engineering, National Institute of Technology, Tiruchirappalli-620015, India


3. Title: Formation And Distribution of Brittle Structures in Friction Stir Welding of AA 6061 To Copper. Influence of Preheat

DOI 10.13140/RG.2.1.2620.9684

Authors: Seyed Vahid Safi (a), Hossein Amirabadi (b), Mohammad Kazem Besharati Givi (c)

Organization: (a) M.Sc. student. Mech. Eng., University of Birjand, Birjand, Iran;

(b) Assoc. prof., Mech. Eng., University of Birjand, Birjand, Iran;

(c)  Assoc. prof., Mech. Eng., University of Tehran, Tehran, Iran;


4. Title: Isothermal Pneumo-Forming of Hemispherical Parts Made Out of Anisotropic Materials In Short-Term Creep Mode

DOI 10.13140/RG.2.1.3033.6408

Authors: S.N. Larin (a), V.I. Platonov (a), Nuzhdin G.A. (b)

Organization: (a) Tula State University, Tula, Russia;

(b) quality assurance company “Konsersium”, Moscow, Russia;


5. Title: MHD Stagnation Point Flow in a Boundary Layer Of a Nano Fluid Over a Stretching Sheet in the Presence of Viscous Dissipation and Chemical Reaction

DOI 10.13140/RG.2.1.2022.4881

Authors: Ch. Achi Reddy (a), B. Shankar (b)

Organization: (a) M.L.R. Institute of Technology, Dundigal, Hyderabad, 500 043, India;

(b) Professor, Department of Mathematics, Osmania University, Hyderabad, 500 007, India;


6. Title: Quality Characteristics of Cutting Surfaces in the Milling of the Titanium Alloy Ti10V2Fe3Al

DOI 10.13140/RG.2.1.4655.1925

Authors: Michael Storchak (a), Lucas Saxarra (a), Like Jiang (b), Yiping Xu (b), Xun Li (c)

Organization: (a) Institute for Machine Tools, University of Stuttgart, Holzgartenstraße 17, 70174 Stuttgart, Germany;

(b) Changhe Aircraft Industries Group Limited Corporation, Jingdezhen, 333002, China;

(c) School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China;


7. Title: A Comparison between Dual Phase Steel and Interstitial Free Steel Due To the Springback Effect

DOI 10.13140/RG.2.1.3749.7205

Authors: E.A. Silva, (a) L.F.V.M. Fernandes (b), N.A.S. Sampaio (c, d), R.B. Ribeiro (b, e), J.W.J. Silva (b , c), M.S. Pereira (a)

Organization: (a) Universidade Estadual Paulista – UNESP, Campus de Guaratinguetá, SP, Brazil;

(b) Faculdades Integradas Teresa D’Ávila – FATEA, Redes Salesianas, Lorena, SP, Brazil;

(c) Associação Educacional Dom Bosco – AEDB, Resende, RJ, Brazil;

(d) Universidade do Estado do Rio de Janeiro – UERJ/FAT, Resende, RJ, Brazil;

(e) Faculdade de Tecnologia do Estado de São Paulo – FATEC, Cruzeiro, SP, Brazil;