MINIMIZING THE PEAK FORCE AND MAXIMIZING THE INTERNAL ENERGY OF THE CORRUGATED CORE SANDWICH PANEL FILLED WITH FOAM USING IMPERIALIST COMPETITIVE ALGORITHM (ICA)

<- Back to II. Mechanical Engineering & Physics Vol. 17

Read full-text

Cite the paper

Dehghani, Hamid; Payandeh, Ali; Mazloum, Ehsan

MINIMIZING THE PEAK FORCE AND MAXIMIZING THE INTERNAL ENERGY OF THE CORRUGATED CORE SANDWICH PANEL FILLED WITH FOAM USING IMPERIALIST COMPETITIVE ALGORITHM (ICA) Journal Article

Mechanics, Materials Science & Engineering, 17 , 2018, ISSN: 2412-5954.

Abstract | Links | BibTeX

Authors:  Hamid Dehghani, Ali Payandeh,  Ehsan Mazloum

ABSTRACT. The key point of the structure optimization, although being cost-effective, is that none of the engineering conditions and criteria must be ignored. Several methods have been used for optimizing of the corrugated core sandwich panel filled with metal foam up to now. In this research, a new method called The Imperialist Competitive Method (ICA), which is inspired by a social-human phenomenon, is used in order to improve the performance of the sandwich panel, and it is shown that’s even useful for constraint problems as well. The objective function is a penalty function to increase the absolute value of the internal energy and decrease the peak force. The results have good agreement with other lectures.

Keywords: sandwich panel, corrugated core, metal foam, mathematical model, optimization method

DOI 10.2412/mmse.3.87.948

References

[1] Z. Wu, W. Liu, L. Wang, H. Fang, and D. Hui, “Theoretical and experimental study of foam-filled lattice composite panels under quasi-static compression loading,” Composites Part B: Engineering, vol. 60, pp. 329–340, 2014.

[2] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Investigation of Energy Absorption in Aluminum Foam Sandwich Panels By Drop Hammer Test: Experimental Results,” Mechanics, Materials Science & Engineering, vol. 7, no. December, pp. 123–141, 2016.

[3] A. Fereidoon, H. Hemmatian, A. Mohammadzadeh, and E. Assareh, “Optimization of sandwich panels based on yielding and buckling criteria by using imperialist competitive algorithm,” Modares Mech. Eng, vol. 13, no. 4, pp. 25–35, 2013.

[4] L. L. Yan, B. Yu, B. Han, C. Q. Chen, Q. C. Zhang, and T. J. Lu, “Compressive strength and energy absorption of sandwich panels with aluminum foam-filled corrugated cores,” Composites Science and Technology, vol. 86, pp. 142–148, 2013.

[5] L. L. Yan, B. Han, B. Yu, C. Q. Chen, Q. C. Zhang, and T. J. Lu, “Three-point bending of sandwich beams with aluminum foam-filled corrugated cores,” Materials and Design, vol. 60, pp. 510–519, 2014.

[6] B. Yu, B. Han, C. Y. Ni, Q. C. Zhang, C. Q. Chen, and T. J. Lu, “Dynamic Crushing of All Metallic Corrugated Panels Filled With Close Celled Aluminum Foams,” Journal of Applied Mechanics, vol. 82, no. 1, p. 11006, 2015.

[7] M. Yazici, J. Wright, D. Bertin, and A. Shukla, “Experimental and numerical study of foam filled corrugated core steel sandwich structures subjected to blast loading,” Composite Structures, vol. 110, no. 1, pp. 98–109, 2014.

[8] T. J. L. Bin Han, Lei L. Yan, Bo Yu, Qian C. Zhang, Chang Q. Chen, “Collapse mechanisms of metallic sandwich structures with aluminum foam-filled corrugated cores,” Journal of mechanics of materials and structures, vol. 9, no. 4, pp. 397–425, 2014.

[9] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Numerical study of energy absorption in aluminum foam sandwich panel structures using drop hammer test,” Journal of Sandwich Structures & Materials, p. 109963621668531, 2017.

[10] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Numerical and Experimental Study of Energy Absorption in Aluminum Corrugated Core Sandwich Panels by Drop Hammer Test,” Mechanics, Materials Science & Engineering, no. February, 2017.

[11] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Experimental Investigation of Energy Absorption in Aluminum Sandwich Panels by Drop Hammer Test. Mechanics,” Mechanics, Materials Science & Engineering, vol. 7, no. December, pp. 123–141, 2016.

[12] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Analytical and Numerical Study of Foam-Filled Corrugated Core Sandwich Panels under Low Velocity Impact,” Mechanics, Materials Science & Engineering, vol. 7, no. December, pp. 176–200, 2016.

[13] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Improving the performance of the sandwich panel with the corrugated core filled with metal foam : Mathematical and Numerical methods.”

[14] N. Mohammadi and A. Mohammadzadeh, “Balancing of the flexible rotors with ICA methods,” International Journal of Research and Reviews in Applied Sciences, vol. 23, no. 1, pp. 54–64, 2015.

[15] C. T. Yang, S.H., Sun, . “Indentation law for composite laminates,” 1981.

[16] M. Nouri Damghani, H. Rahmani, A. Mohammadzadeh Gonabadi, and S. Shokri-Pour, “Comparison of Static and Dynamic Buckling Critical Force in the Homogeneous and Composite Columns ( Pillars ),” International Review of Mechanical Engineering, vol. 5, no. 7, pp. 1208–1212, 2011.

[17] T. Thomsen, “Theoretical and experimental investigation of local bending effects in sandwich plates,” vol. 30, pp. 85–101, 1995.

[18] H. F. Turk M H, “Localized damage response of composite sandwich plates,” Compos Part B: Eng, vol. 30, pp. 65–157, 1999.

[19] Abrate S, “Localized impact on sandwich structures with laminated facings,” Applied Mechanics Reviews, vol. 50, no. 2, pp. 69–82, 1997.

[20] M. S. H. Fatt and K. S. Park, “Dynamic models for low-velocity impact damage of composite sandwich panels ± Part A : Deformation,” vol. 52, 2001.

[21] A. . Dobyns, “Analysis of simply-supported orthotropic plates subject to static and dynamic loads,” The American Institute of Aeronautics and Astronautics, vol. 19, no. 5, pp. 642–650, 1981.

[22] S. Hou, S. Zhao, L. Ren, X. Han, and Q. Li, “Crashworthiness optimization of corrugated sandwich panels,” Materials and Design, vol. 51, pp. 1071–1084, 2013.

[23] A. Mohammadzadeh and A. Ghoddoosian, “Balancing of flexible rotors with optimization methods,” International Review of Mechanical Engineering, vol. 4, no. 7, pp. 917–923, 2010.

[24] A. Mohammadzadeh, A. Ggoddoosian, and M. Nouri Damghani, “Balancing of the Flexible Rotors with Particle Swarm Optimization Method,” International Review of Mechanical Engineering, vol. 3, no. 5, pp. 490–496, 2011.

[25] N. Mohammadi and A. Mohammadzadeh, “Optimizing the Collector Performance of a Solar Domestic Hot Water System by the Use of Imperialist Competitive Algorithm with the Help of Exergy Concept,” International Journal of Engineering & Technology Sciences, vol. 03, no. 01, pp. 65–78, 2015.

[26] A. Mohammadzadeh and N. Etemadee, “Design of Heater for City Gate Station Assisted by Solar Energy,” International Review of Mechanical Engineering, vol. 6, no. 5, pp. 730–735, 2012.

[27] A. Mohammadzadeh Gonabadi and M. Nouri Damghani, “Multi-Objective Optimization of Kinematic Characteristics of Geneva Mechanism Using High-Tech Optimization Methods,” Mechanics, Materials Science & Engineering, no. March, 2017.

[28] A. Mohammadzadeh and N. Etemadee, “Optimized Positioning of Structure Supports with PSO for Minimizing the Bending Moment,” International Review of Mechanical Engineering, vol. 5, no. 3, pp. 422–425, 2011.

[29] A. Mohammadzadeh, N. Mahdipour, and A. Mohammadzadeh, “Forecasting the Cost of Water Using a Neural Network Method in the Municipality of Isfahan,” Journal of Optimization in Industrial Engineering, vol. 11, pp. 73–85, 2012.

[30] A. Mohammadzadeh, N. Mahdipour, A. Mohammadzadeh, and M. Ghadamyari, “Comparison of forecasting the cost of water using statistical and neural network methods: Case study of Isfahan municipality,” African Journal of Business Management, vol. 6, no. 8, pp. 3001–3013, 2012.

[31] N. Mohammadi, A. Mohammadzadeh, and F. Fallah Tafti, “Design and Optimization of Piezoresistive MEMS Pressure Sensors Using ABAQUS,” International Journal of Engineering & Technology Sciences, vol. 2, no. 3, pp. 461–473, 2014.

[32] N. Mohammadi, F. Fallah Tafti, A. R. Arshi, A. Mohammadzadeh, and R. Mimar, “Extracting the Optimal Vibration Coefficients of Forefoot Offloading Shoes Using Genetic Algorithms,” International Journal of Engineering and Technology, vol. 2, no. 6, pp. 487–496, 2014.

[33] A. Mohammadzadeh Gonabadi, M. Mohebbi, and A. Sohan Ajini, “The Topology and Weight Optimization of a Truss Using Imperialist Competitive Algorithm (ICA),” Mechanics, Materials Science & Engineering, vol. 10, no. May, 2017.

[34] A. Mohammadzadeh Gonabadi, M. Mohebbi, and A. Sohan Ajini, “Topology and Weight Optimization of a 3D Truss by Numerical Method,” Mechanics, Materials Science & Engineering, no. May, 2017.

[35] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Improving the performance of the sandwich panel with the corrugated core filled with metal foam: Mathematical and Numerical methods,” Journal of Mechanics of Advanced Composite Structures, vol. Accepted, 2018.

[36] F. Fallahtafti, M. Alavikia, and A. R. Arshi, “Bond graph application in sports engineering: Evaluating the effects of impact parameters on tennis elbow injury,” in 2013 20th Iranian Conference on Biomedical Engineering (ICBME), 2013, pp. 255–259.

[37] Baseri, H., & Belali-Owsia, M. (2017). A novel hybrid ICA-ANFIS model for prediction of manufacturing processes performance. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(2), 181–190. https://doi.org/10.1177/0954408915585256

[38] Yang, Q., Yang, Q., Huang, M., & Yan, W. (2018). Particle swarm optimization-based empirical mode decomposition–kernel independent component analysis joint approach for diagnosing wind turbine gearbox with multiple faults. Transactions of the Institute of Measurement and Control, 40(6), 1836–1845. https://doi.org/10.1177/0142331217691336

[39] Guo, W., Zhang, B., Chen, G., Wang, X., & Xiong, N. (2013). A PSO-Optimized Minimum Spanning Tree-Based Topology Control Scheme for Wireless Sensor Networks. International Journal of Distributed Sensor Networks. https://doi.org/10.1155/2013/985410

[40] Yao, J., Jiang, G., Gao, S., Yan, H., & Di, D. (2014). Particle swarm optimization-based neural network control for an electro-hydraulic servo system. Journal of Vibration and Control, 20(9), 1369–1377. https://doi.org/10.1177/1077546312472926

Creative Commons Licence
Mechanics, Materials Science & Engineering Journal by Magnolithe GmbH is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at www.mmse.xyz.