OPTIMIZING THE PEAK FORCE AND INTERNAL ENERGY OF THE CORRUGATED CORE SANDWICH PANEL FILLED WITH FOAM BY SIMULATED ANNEALING ALGORITHM

<- Back to II. Mechanical Engineering & Physics Vol. 18

Read full-text

Cite the paper

Dehghani, Hamid; Payandeh, Ali; Mazloum, Ehsan

OPTIMIZING THE PEAK FORCE AND INTERNAL ENERGY OF THE CORRUGATED CORE SANDWICH PANEL FILLED WITH FOAM BY SIMULATED ANNEALING ALGORITHM Journal Article

Mechanics, Materials Science & Engineering, 18 , 2018, ISSN: 2412-5954.

Abstract | Links | BibTeX

Authors: Hamid Dehghani, Ali Payandeh, Ehsan Mazloum   

ABSTRACT.  Structural optimization is a beneficial procedure which taking all engineering aspects of design into account as well as cost. There are plenty of methods developed for optimization of the corrugated core sandwich panel filled with metal foam. In this research, with the aim of enhancing the performance of sandwich panel, a new method inspired by a social-human phenomenon was used, which is called “Simulated Annealing Algorithm (SAA)”. This method was shown to be useful for constraint problems and was in line with the previous literature. The goal function in this study was a penalty function to increase the absolute value of the internal energy and decreasing the peak force.

Keywords: sandwich panel, corrugated core, metal foam, mathematical model, optimization method

DOI 10.2412/mmse.26.90.448

References

[1] Z. Wu, W. Liu, L. Wang, H. Fang, and D. Hui, “Theoretical and experimental study of foam-filled lattice composite panels under quasi-static compression loading,” Composites Part B: Engineering, vol. 60, pp. 329–340, 2014.

[2] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Investigation of Energy Absorption in Aluminum Foam Sandwich Panels By Drop Hammer Test : Experimental Results,” Mechanics, Materials Science & Engineering, vol. 7, no. December, pp. 123–141, 2016.

[3] A. Fereidoon, H. Hemmatian, A. Mohammadzadeh, and E. Assareh, “Optimization of sandwich panels based on yielding and buckling criteria by using imperialist competitive algorithm,” Modares Mech. Eng, vol. 13, no. 4, pp. 25–35, 2013.

[4] L. L. Yan, B. Yu, B. Han, C. Q. Chen, Q. C. Zhang, and T. J. Lu, “Compressive strength and energy absorption of sandwich panels with aluminum foam-filled corrugated cores,” Composites Science and Technology, vol. 86, pp. 142–148, 2013.

[5] L. L. Yan, B. Han, B. Yu, C. Q. Chen, Q. C. Zhang, and T. J. Lu, “Three-point bending of sandwich beams with aluminum foam-filled corrugated cores,” Materials and Design, vol. 60, pp. 510–519, 2014.

[6] B. Yu, B. Han, C. Y. Ni, Q. C. Zhang, C. Q. Chen, and T. J. Lu, “Dynamic Crushing of All Metallic Corrugated Panels Filled With Close Celled Aluminum Foams,” Journal of Applied Mechanics, vol. 82, no. 1, p. 11006, 2015.

[7] M. Yazici, J. Wright, D. Bertin, and A. Shukla, “Experimental and numerical study of foam filled corrugated core steel sandwich structures subjected to blast loading,” Composite Structures, vol. 110, no. 1, pp. 98–109, 2014.

[8] T. J. L. Bin Han, Lei L. Yan, Bo Yu, Qian C. Zhang, Chang Q. Chen, “Collapse mechanisms of metallic sandwich structures with aluminum foam-filled corrugat-ed cores,” journal of mechanics of materials and struc-tures, vol. 9, no. 4, pp. 397–425, 2014.

[9] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Numerical study of energy absorption in aluminum foam sandwich panel structures using drop hammer test,” Journal of Sandwich Structures & Materials, pp. 1–16, 2017.

[10] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Numerical and Experimental Study of Energy Absorption in Aluminum Corrugated Core Sandwich Panels by Drop Hammer Test,” Mechanics, Materials Science & Engineering, no. February, 2017.

[11] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Experimental Investigation of Energy Absorption in Aluminum Sandwich Panels by Drop Hammer Test. Mechanics,” Mechanics, Materials Science & Engineering, vol. 7, no. December, pp. 123–141, 2016.

[12] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Analytical and Numerical Study of Foam-Filled Corrugated Core Sandwich Panels under Low Velocity Impact,” Mechanics, Materials Science & Engineering, vol. 7, no. December, pp. 176–200, 2016.

[13] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Improving the performance of the sandwich panel with the corrugated core filled with metal foam: Mathematical and Numerical methods,” Journal of Mechanics of Advanced Composite Structures.

[14] H. Dehghani, A. Payandeh, and E. Mazloum, “Minimizing the Peak Force and Maximizing the Internal Energy of the corrugated core sandwich panel filled with foam using Imperialist Competitive Algorithm (ICA),” Mechanics, Materials Science & Engineering, vol. Under, no. Review, p. 0, 2018.

[15] N. Mohammadi and A. Mohammadzadeh, “Balancing of the flexible rotors with ICA methods,” International Journal of Research and Reviews in Applied Sciences, vol. 23, no. 1, pp. 54–64, 2015.

[16] C. T. Yang, S.H., Sun, . “Indentation law for composite laminates,” 1981.

[17] M. Nouri Damghani, H. Rahmani, A. Mohammadzadeh, and S. Shokri-pour, “Comparison of Static and Dynamic Buckling Critical Force in the Homogeneous and Composite Columns (Pillars),” International Review of Mechanical Engineering, vol. 5, no. 7, pp. 1208–1212, 2011.

[18] T. Thomsen, “Theoretical and experimental investigation of local bending effects in sandwich plates,” vol. 30, pp. 85–101, 1995.

[19] H. F. Turk M H, “Localized damage response of composite sandwich plates,” Compos Part B: Eng, vol. 30, pp. 65–157, 1999.

[20] Abrate S, “Localized impact on sandwich structures with laminated facings,” Applied Mechanics Reviews, vol. 50, no. 2, pp. 69–82, 1997.

[21] M. S. H. Fatt and K. S. Park, “Dynamic models for low-velocity impact damage of composite sandwich panels ± Part A : Deformation,” vol. 52, 2001.

[22] A. . Dobyns, “Analysis of simply-supported orthotropic plates subject to static and dynamic loads,” The American Institute of Aeronautics and Astronautics, vol. 19, no. 5, pp. 642–650, 1981.

[23] S. Hou, S. Zhao, L. Ren, X. Han, and Q. Li, “Crashworthiness optimization of corrugated sandwich panels,” Materials and Design, vol. 51, pp. 1071–1084, 2013.

[24] A. Mohammadzadeh and A. Ghoddoosian, “Balancing of flexible rotors with optimization methods,” International Review of Mechanical Engineering, vol. 4, no. 7, pp. 917–923, 2010.

[25] A. Mohammadzadeh, A. Ghoddoosian, and M. Nouri Damghani, “Balancing of the Flexible Rotors with Particle Swarm Optimization Method,” International Review of Mechanical Engineering, vol. 3, no. 5, pp. 490–496, 2011.

[26] N. Mohammadi and A. Mohammadzadeh, “Optimizing the Collector Performance of a Solar Domestic Hot Water System by the Use of Imperialist Competitive Algorithm with the Help of Exergy Concept,” International Journal of Engineering & Technology Sciences, vol. 03, no. 01, pp. 65–78, 2015.

[27] A. Mohammadzadeh and N. Etemadee, “Design of Heater for City Gate Station Assisted by Solar Energy,” International Review of Mechanical Engineering, vol. 6, no. 5, pp. 730–735, 2012.

[28] M. Nouri Damghani and A. Mohammadzadeh Gonabadi, “Multi-Objective Optimization of Kinematic Characteristics of Geneva Mechanism Using High-Tech Optimization Methods,” Mechanics, Materials Science & Engineering, no. March, 2017.

[29] A. Mohammadzadeh and N. Etemadee, “Optimized Positioning of Structure Supports with PSO for Minimizing the Bending Moment,” International Review of Mechanical Engineering, vol. 5, no. 3, pp. 422–425, 2011.

[30] A. Mohammadzadeh, N. Mahdipour, and A. Mohammadzadeh, “Forecasting the Cost of Water Using a Neural Network Method in the Municipality of Isfahan,” Journal of Optimization in Industrial Engineering, vol. 11, pp. 73–85, 2012.

[31] A. Mohammadzadeh, N. Mahdipour, A. Mohammadzadeh, and M. Ghadamyari, “Comparison of forecasting the cost of water using statistical and neural network methods: Case study of Isfahan municipality,” African Journal of Business Management, vol. 6, no. 8, pp. 3001–3013, 2012.

[32] N. Mohammadi, A. Mohammadzadeh, and F. Fallah Tafti, “Design and Optimization of Piezoresistive MEMS Pressure Sensors Using ABAQUS,” International Journal of Engineering & Technology Sciences, vol. 2, no. 3, pp. 461–473, 2014.

[33] N. Mohammadi, F. Fallah Tafti, A. R. Arshi, A. Mohammadzadeh, and R. Mimar, “Extracting the Optimal Vibration Coefficients of Forefoot Offloading Shoes Using Genetic Algorithms,” International Journal of Engineering and Technology, vol. 2, no. 6, pp. 487–496, 2014.

Creative Commons Licence
Mechanics, Materials Science & Engineering Journal by Magnolithe GmbH is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at www.mmse.xyz.